Where can I use Drva Wood?

You can put Drva Wood directly to almost any surface in your home or business. With our easy 'Glue & Stick' application, you can put it over textured walls, ceilings, kitchen islands, tile backsplashes, doors, shelving, furniture and so much more! No nails or screws required.

Will it install directly over textured and or painted surfaces?

Absolutely! You can even glue it straight over popcorn ceilings, stucco, uneven cement, and almost any other surface.

Will this install over my popcorn ceilings?

It sure will! This is one of many areas Drva Wood works great whereas the sticker and Velcro wood companies do not.

Can I put Drva Wood on the ceiling?

Yes you can! This is the only application where nails are recommended.

How about using it in bathrooms or as a backsplash?

No problem at all. All of our wood is water resistant but no wood is waterproof. If the area gets a lot of direct water on it, you should seal it using a matte finish wood sealer sold at your local hardware store. In most cases, you won’t need to if used inside, but you always have the option.

Can it be used outside?

Yes is can! You will need to seal it though. Use any matte finish wood sealer sold at your local hardware store. Keep in mind that direct sun and rain will further weather the look of your wood. Our opinion is this makes it look even better!

Does Drva wood work for doors

Absolutely! You can glue it straight over existing doors or build a new door from scratch. A piece of plywood makes a great base for this!

Can it be used in commercial or retail space?

Definitely! Drva is the perfect product for commercial, retail, as well as restaurant and café. Companies such as Jim Beam, Quicksilver, RVCA, Crane & Lion and Richer Poorer have already installed our product.

Will this install over a mirror?

Yes! Just very lightly scuff the mirror using a medium grit sandpaper and wipe it down with a degreaser. Once dry you can use our BOND-ALL Eco Adhesive to mount it straight over the mirror or glass surface.

How does Drva wood hold up as flooring?

his is the only thing we really don't recommend you use Drva Wood for. Luckily there are so many other flooring options out there!

Can it be applied above a fireplace?

As long as your fireplace is safe and not emitting excess heat (if it is, you have bigger issues than deciding where to put Drva Wood), then yes…. This is a perfect place for our products. Always consult your fireplace's installation and safety manual before just to be sure. Always better safe than sorry!

Your boards are individual planks, wouldn't panels be easier

Panels might go up quick as they are larger but even the best ones create a repeating pattern on the wall and can easily be spotted when you look for it. The other issue is that your wall likely is not completely level. With planks, you can easily balance this, whereas with panels you are limited. Planks are very easy to install, simple to correct wall imperfections and will offer you a much better look in your space!

Can I take my Drva Wood project with me when I move?

You can put our product directly to a plywood backerboard and fix the whole piece to the wall. This will take careful planning and measurements, but it can be done!

Should I use your product or the Velcro or Sticker wood options?

We are so glad you asked! First we would recommend you ask a contractor if they carry stickers and Velcro in their tool boxes. They will likely laugh and tell you 'no, those are not suitable methods to install anything.' And they would be correct. Stickers are for kids. Our application is just as easy but it lasts. No need to worry about it falling and injuring your child when they touch it or coming home to find that your dog has taken off panels and used them as chew-toys leaving a bark like substance all over your home. Use Drva Wood with the confidence as it is meant to withstand the abuse we all know your family can throw at it!

Is it possible to use Drva wood to build a boat?

Maybe, but we think you should save your money and buy one from a reputable boat manufacturer. Would make for a pretty fancy raft though!

How about when I want to take it down or change the look?

Our glue is a permanent product (as any remodel should be). This means removal will damage the wall, although we have two easy fixes. Fix 1. Paint it! Drva Wood is 100% paintable. Fix 2. It is only 1/4'' thick, so glue 1/4'' drywall over the top of your wood wall. You will have a brand new wall (it will be stronger it was) and you only lost a 1/2'' of wall.

What is 'Glue and Stick'?

'Glue and Stick' is our super-easy method of attaching our wood to your wall. Simply apply glue to the back of your board and stick it directly to your surface. Couldn't be easier!

How long will it take to install?

This is a hard one to answer as each project is so different. On average We would say that a 5' by 8' wall (40 Square feet) should take about 3 to 4 hours. Once you get the hang of it, installation easier and quicker!

Do I need a contractor to install?

NO! Beginner remodelers and project enthusiast, this is for you! Simply 'Glue and Stick' and put directly to almost any surface. You can even use a small hand saw to cut if need be. Tip: A low powered electric miter saw from your local hardware store will make this easier and you can pick one up for $79!

What do I need to install?

Tools: level, tape measure, caulking gun, a hand saw with a miter box (you can also use a utility knife, but a chop or miter saw is recommended).Materials: BOND-ALL Adhesive, Drva Patch Kit

Why do I need to seal the wood if I use it in a damp area?

Not unless there is direct water on it . No need to seal if using in the bathroom or as a backsplash as long as properly installed. We do not recommend using in showers or anywhere else with direct or standing water contact.

Do I need to seal the wood if I use it outside?

Yes. If the product is going outside you should definitely seal the product using a matte finish sealer from your local hardware store. Direct sun and rain will alter the finish over time bringing out more qualities of the wood.

How do I cut the wood?

You can use a handsaw, a power saw or score it with a utility knife (razor blade) a few times and snap the board. We recommend a power saw (chop or miter saw's are easiest) if you have one.

What happens if the last plank doesn't fit to my ceiling

Measure the space and mark your board to the size it needs to be. Then, using a utility knife, slowly cut your plank along the mark. You will need to go over it several times with the utility knife to get a deep enough cut to snap. If you have access to a table saw... this will be the easiest way to cut it.

Will it really stay on the wall without using nails?

It will. We have tested a single unsupported board on painted drywall and once it is set up, we ha ve actually been able to do pull-ups on it! Our Eco-Adhesive is uber-strong when properly applied.

Do I need expensive tools to do this?

Absolutely not. You can do this with a hand saw, utility knife, measuring tape, level, and a pencil! Power tools help but are not required!

What happens if I get glue on my hands?

Wash it off. It is an Eco product. You are good to go!

How long will it stay up?

As long as you want it to. Our glue is no joke and our bond is serious!

Absolutely! We hope you do as this is a great way to ensure you get the perfect finish. We offer an instant savings on samples when you join our email list:info@drvahome.com or just order them directly: Contact Us. And guess what… our samples can be used in your project and they also make great coasters!

I am a little short on money, can i have the product now but pay later?

Sure! You can use our financing option at checkout.

How long my order take to ship?

Please allow two business days to process your order. Once processed, most orders arrive within 3 to 5 business days via ground shipping.

Can I get expedite shipping? I need it fast?

You sure can! Just choose the expedited shipping method at checkout. Keep in mind the order can take 1 to 2 days to process.

Is it possible to pick up my order at your location to save money on shipping costs?

Yes! Just select the 'Pick up my order at Drva, I don't need it shipped' option We will hold your order for you for up to 15 days.

Drva Wood is 100% real Wood. It is milled, handled, and packaged all in the United States by real Americans!

How thick are the boards?

1/4'' thick. This makes our wood super light, easy to work with and very sturdy. We are not as thin as some of the sticker wood companies that easily break apart. If you order samples from them… you will see for yourself!

What type of wood is it?

We use spruce and pine. Both are light, easy to cut and are sustainable!

Is it pet and child safe?

YES! Our wood is new wood to ensure that there are no pesticides, asbestos, lead paint, creosote or any other harmful toxins found in reclaimed materials. We use BOND-ALL; our USDA approved, Eco-Adhesive for installation which is 100% free of isocyanates and solvents which are harmful the respiratory health of your family! Unlike the Sticker or Velcro boards, you don't have to worry about boards getting knocked off the walls and injuring the ones you care about the most.

Is it an Eco Product, does it really hold?

Like you wouldn't believe! It is up to 10x stronger than standard adhesives.

Why should I buy an Eco-Adhesive?

Because there are no toxic solvents or Isocyanates. Those are the smells that are so prevalent in the other glues and adhesives available in your local hardware stores. BOND-ALL is USDA approved and it is Eco Safe. Protect yourself, the ones you care about the most while protecting the environment.... Choose BOND-ALL!

What is the warranty on Drva Wood?

We offer a 60 day limited warranty. This covers broken or damaged boards that have not yet been mounted to any surface. For more details, visit our Warranty Policy page.

What is the warranty on BOND-ALL Adhesive

We offer a 100% money back guarantee* on BOND-ALL! For more details, visit our Warranty Policy page.

Wood/VINTAGE BARNBOARD

VINTAGE BARNBOARD

$67.49

$5.99 per square foot
This finish is a warm gray with a slight brown undertone. It is rich in
Tone and texture. Each board is hand hewn and finished on the top and all
sides. Our real wood planks have raised grain texture with the matt
finish you would expect from reclaimed wood. Reclaim Your Space!

Order Samples